Structural Integrity:

The following activities and sequences will be followed CAP Management :

• Development of Full Engineering As-Built Drawings showing structure,  loading, elements, dimensions, levels, foundations and framing on Plan, Section and Elevation drawing
• The engineering team is to carry out supporting calculations with a model based design check to assess the safety and serviceability of the building against loading as set out in BNBC-2006, Lower rate provisions can be applied in accordance with the Tripartite Guidelines following international engineering practice and justification for these lower rate provisions must be made.
• A report on engineering tests carried out to justify material strengths and reinforcement content in all key elements studied.
• Detailed load plans will be prepared for each level showing current and potential future loading with all key equipment items shown with associated load
• The Engineering team will prepare an assessment report that covers the following:
  1. As-Built drawings including:
     • Plans at each level calling up and dimensioning all structural componen
     • Cross sectional drawings showing structural beams, slabs, floor to floor heights, roof build-ups and basic design information of the structu
  2. Results of testing for strength and material

• Details of loading, inputs and results of computer modeli

1. Commentary on adequacy/inadequacy of elements of the structur
2. Floor Load plan

Deliverables:

• As-built structural drawings.
• As-built Architectural Drawings.
• Carry out in situ concrete stresses either by 100mm dia. cores or existing cylinder strength data for stresses column.
• Results of testing for strength and materials.
• Details of loading, inputs and results of computer modeling.
• Commentary on adequacy/inadequacy of elements of the structure.
• Floor Load plans.
• Retrofitting Design & Drawing